Design for Improvement of COP from Waste Heat Utilization Through Air Conditioning System

Authors

  • Saba Sabir Department of Mechanical Engineering, Shivalik College of Engineering, Dehradun, Uttarakhand, India
  • Hitesh Pant Frontier Media SA, Comeniusstrabe, Dresden, Germany
  • Nikhi Kanojia Department of Mechanical Engineering, Shivalik College of Engineering, Dehradun, Uttarakhand, India
  • Kuldeep Rawat Department of Mechanical Engineering, Shivalik College of Engineering, Dehradun, Uttarakhand, India

DOI:

https://doi.org/10.13052/jgeu0975-1416.1115

Keywords:

Waste heat recovery, COP, heat exchanger, cooling effect, de-superheat, air-conditioning system

Abstract

Energy is in higher demand than ever before since there are an increasing number of applications for it; nevertheless, the existing sources are unable to supply it in sufficient quantities. Alternate energy sources should be utilized, and as a consequence, energy conservation should be achieved through the utilization of waste heat from air conditioning systems. The major objective of this piece is to make use of waste heat generated by residential air conditioning systems while simultaneously increasing the coefficient of performance (COP). In order to achieve this goal, an experimental setup is utilized. In this configuration, an indirect kind of heat recovery equipment is used, and a heat exchanger that converts heat from a refrigerant to water is positioned between the compressor and the condenser of the host refrigeration system. The hot refrigerant gas generated by the compressor is sent via one side of the heat exchanger, while water is forced through the other side. The temperature of the water is raised as a result of the heated refrigerant gas. Because of this, the system’s COP might potentially increase by up to 16%.

Downloads

Download data is not yet available.

Author Biography

Hitesh Pant, Frontier Media SA, Comeniusstrabe, Dresden, Germany

Hitesh Pant has received his bachelor’s degree in Computer Science from Kumaon University Dwarahat in 2009. He has an expertise in designing developing and architecting complex data & AI driven software application in various domains. Currently he is working as a Software Engineering Manager at Frontiers living in Dresden, Germany, As an Engineering manager he is leading & building a team consisting of Senior engineers, Data engineers & Scientist for creating AI based data intensive distributed systems for simplifying peer review process of scientific articles & journals.

References

Srinivasan, V., Christensen, R., “full-scale, testing, and analysis of an innovative natural-convection-driven heat-recovery heat exchanger for space-conditioning applications,” Heat Transfer Engineering, vol. 15, pp. 44–54, 1994.

Prabhanjan, D. G. T. J. Rennie and Vijaya Raghavan, G. S. (2004, 4). Natural convection heat transfer from helical coiled tubes. International Journal of Thermal Sciences 43(4), pp. 359–365, 2004.

Jayakumar, J. S. Mahajani, S. M. Mandal, J. C. Vijayan, P. K. and Bhoi, R., Experimental Prediction of Heat Transfer Correlations in Heat Exchangers by Tomasz, 2008.

R.B. Lokapure, J.D. Joshi, e-ISSN: 2278-067X, p-ISSN: 2278-800X, www.ijerd.com Volume 5, Issue 3 (December 2012).

Panwar, K, Murthy, D, S, “Analysis of thermal characteristics of the ball packed thermal regenerator”, Procedia Engineering, 127, 1118–1125.

Panwar, K, Murthy, D, S, “Design and evaluation of pebble bed regenerator with small particles”, Materials Today, Proceeding, 3(10), 3784–3791.

Bisht, N, Gope, P, C, Panwar, K, “Influence of crack offset distance on the interaction of multiple cracks on the same side in a rectangular plate”, Frattura ed Integrità Strutturale” 9(32), 1–12.

Panwar, K, Kesarwani, A, “Unsteady CFD Analysis of Regenerator”, International Journal of Scientific & Engineering Research, 7(12), 277–280.

Singh, I., Bajpai, P. K., and Panwar, K. “Advances in Materials Engineering and Manufacturing Processes.

Downloads

Published

2023-03-07

How to Cite

Sabir, S., Pant, H., Kanojia, N., & Rawat, K. (2023). Design for Improvement of COP from Waste Heat Utilization Through Air Conditioning System. Journal of Graphic Era University, 11(01), 57–68. https://doi.org/10.13052/jgeu0975-1416.1115

Issue

Section

Articles