Analysis of Line to Ground Fault in Inverter FED IM Drive System

Authors

  • Bhawana Negi Department of Electrical Engineering Graphic Era University, Dehradun, Uttarakhand, India
  • Vivek Sharma Department of Electrical Engineering Graphic Era University, Dehradun, Uttarakhand, India
  • Pooja Kholia Department of Electrical Engineering Graphic Era University, Dehradun, Uttarakhand, India

Keywords:

FFT, Fault, Inverter, MOSFET.

Abstract

Inverter configuration is presented for the Induction Motor drive. One inverter is design for the step-down voltage
and the second inverter is designed for the step-up voltage. PWM use to provide the gate signal to the MOSFET in
the circuit. The inverter and the induction motor used as industrial appliances, so it is important to monitor and analyse
the fault of the inverter output. While doing the conversion of ac to dc and dc to ac using the power electronics device
the harmonics exist. Due to the malfunction in the VSI and CSI the faults are introduced. The current waveform is
taken from each phase and the spectrum is analysed. The harmonic analysis with the help of FFT transform is carried
out for the short circuit as well as normal condition. The simulation of the VSI and CSI using MATLAB is compared
for both conditions i.e. without fault and line to ground circuit faults.

Downloads

Download data is not yet available.

References

Bhutia, B., Ali, M., & Tiadi, N. (2014). Design of Three Phase PWM Voltage Source Inverter for Photovoltaic

Application. International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control

Engineering, 2(4), 2321-2004.

Kalaskar, C. S., Gond, V. J. (2014). Motor Current Signature Analysis to Detect the Fault in Induction Motor. Int.

Journal of Engineering Research and Applications, 4(6), 58-61.

Kavitha, M. N., & Sujitha, M. N. (2014). Motor current signature analysis of multilevel inverter fed induction motors

using wavelets. International Journal of Advanced Information Science and Technology, 22(22), 145-149.

Manap, M., Abdullah, A. R., Saharuddin, N. Z., Abidullah, N. A., Ahmad, N. S., & Bahari, N. (2016). Voltage Source

Inverter Switches Faults Analysis Using S-Transform. Power, 2, 3.

Mohanraj, K., Paramasivam, S., & Dash, S. S. (2014). DC Link Faults Detection in a 3 phase VSI fed Induction Motor

Drive using Wavelet Transform. International Journal of Scientific & Engineering Research. 5(5), 625-629.

Pandian, G., & Rama Reddy, S. (2013). Simulation and implementation of PWM Inverter Fed induction motor drive.

International Journal of Innovative Research in Science, Engineering and Technology. 2(11), 6103-13.

Patel, D., Patel, A. R. (2013), Current source inverter-fed AC machine drive system. Journal of Information,

Knowledge and Research in Electrical Engineering. 2(2).

Journal of Graphic Era University

Vol. 4, Issue 2, 84-91, 2016

ISSN: 0975-1416 (Print)

Sharma, C. S., & Nagwani, T. (2013). Simulation and analysis of PWM inverter fed induction motor drive.

International Journal of Science, Engineering and Technology Research, 2(2), 359-366.

Sharma, V., & Mendiratta, G. (2013). Detection of faults in AC to AC converter fed induction motor driver.

International Journal of Scientific & Engineering Research, 4(11), 85-88.

Umamaheswari, N., SrinivasRaju, P., Sravanthi, K., & Kumar, K. K. (2013). Performance analysis of CSI based PV

system during LL and TPG faults. IOSR Journal of Electrical and Electronics Engineering, 6(3), 101-107

Downloads

Published

2023-02-28

How to Cite

Negi, B., Sharma, V., & Kholia, P. (2023). Analysis of Line to Ground Fault in Inverter FED IM Drive System. Journal of Graphic Era University, 4(2), 84–91. Retrieved from https://riverpublishersjournal.com/index.php/JGEU/article/view/120

Issue

Section

Articles