Study of Pure Torsion in Open Thin Walled Sections using Finite Element Analysis

Authors

  • Pavan Kumar Emani Department of Civil Engineering Graphic Era University, Dehradun, India
  • Shashank Kothari Department of Civil Engineering Graphic Era University, Dehradun, India

Keywords:

Pure Torsion, Warping, Open Thin Walled Section, ABAQUS, Finite Element Method.

Abstract

Generally, Open Thin Walled (OTW) cross sections are susceptible to torsional instability, due to their low
torsional rigidity. Several analytical methods have been proposed to calculate the torsional deformation
(warping) along the direction perpendicular to the cross section of such OTW sections when subjected to
torsion. In this paper, we have analysed the warping in the OTW sections to validate that in case of pure torsion
of such bars having free ends, the warping is uniform throughout the whole length of the bar and any line
parallel to centroidal axis can be taken as axis of rotation. The finite element analysis using ABAQUS has been
done to analyse the warping of such sections when subjected to pure torsion. This paper also represents the
comparative study of warping distribution in OTW sections using the theoretical approach and Finite Element
Modeling (FEM).

Downloads

Download data is not yet available.

References

Asgarian, B., Soltani, M., & Mohri, F. (2013). Lateral-torsional buckling of tapered thin-walled beams with

arbitrary cross-sections. Thin-Walled Structures, 62, 96-108.

Basaglia, C., Camotim, D., & Silvestre, N. (2012). Torsion warping transmission at thin-walled frame joints:

kinematics, modeling and structural response. Journal of Constructional Steel Research, 69(1), 39-53.

Erkmen, R. E., & Attard, M. M. (2011). Lateral–torsional buckling analysis of thin-walled beams including

shear and pre-buckling deformation effects. International Journal of Mechanical Sciences, 53(10), 918-925.

Guokang, E. (1997). Modification in the theory on flexural-torsional buckling of structures. Applied

Mathematics and Mechanics, 18(10), 975-986.

Pignataro, M., Rizzi, N., Ruta, G., & Varano, V. (2010). The effects of warping constraints on the buckling of

thin-walled structures. Journal of Mechanics of Materials and Structures, 4(10), 1711-1727.

Timoshenko, S. P., & Gere, J. M. (1963). Theory of Elastic Stability, 2nd ed., McGraw- Hill International

Editions.

Wagner, H., & Pretschener, W. (1934). Torsion and buckling of open sections, technical memorandum. National

Advisory Committee for Aeronautics, Washington, 11(784), 1-14

Downloads

Published

2023-02-28

How to Cite

Emani, P. K., & Kothari, S. (2023). Study of Pure Torsion in Open Thin Walled Sections using Finite Element Analysis. Journal of Graphic Era University, 5(2), 140–146. Retrieved from https://riverpublishersjournal.com/index.php/JGEU/article/view/106

Issue

Section

Articles